Network switches are hardware devices used to connect devices within a local area network (LAN). They receive incoming data packets and forward them to their intended destination within the network.
Switches are designed to operate at the data link layer (layer 2) of the OSI model and use MAC addresses to make forwarding decisions. They can support a range of Ethernet standards such as 10/100/1000Mbps and can have anywhere from a few to hundreds of ports.
Network switches can be managed or unmanaged. Managed switches offer more control and functionality, such as VLAN support and Quality of Service (QoS) settings, while unmanaged switches are simpler and more cost-effective.
When choosing a network switch, it's important to consider factors such as the number of ports needed, the required data transfer rate, and the level of management and control needed for the network.
Layer 2 network switch designed for video data transmission 24 x 10/100/1000 Mbps ethernet ports, 1 x 10/100/1000 Mbps uplink ethernet port and 1 x 10/100/1000 Mbps uplink SFP port IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z network standards available IEEE 802.3 af & at high PoE power supply Store-and-forward switching Safe and reliable using 6 KV high surge protection Plug and play ensures simplicity and convenience.
8 × 100 Mbps PoE RJ45 ports, 1 × gigabit network RJ45 port. IEEE 802.3at/af standard for PoE ports. Network topology management, alarm push, network health monitor. 6 KV surge protection for PoE ports. Up to 300 m long-range transmission. AF/AT camera can reach up to 300 m in extend mode.
24 ports with speeds of 10/100/1000Mbps using RJ45 connectors. It has energy-efficient technology that reduces power consumption. It also supports MAC address self-learning and auto MDI/MDIX. The device can be mounted on a standard 19-inch rack using a steel case.
This device has 8 ports that support speeds of 10/100/1000 Mbps using RJ45 connectors. Additionally, there are 4 ports that support Power over Ethernet (PoE+) which allows for both data and power to be transferred over the same cable. This device is compatible with IEEE 802.3af/at compliant PDs and does not require any configuration or installation. It also supports 802.1p/DSCP QoS which enables smooth traffic for latency-sensitive applications. Each PoE port can provide up to 30 W of power and all PoE ports combined can provide up to 64 W of power.
8-Port Gigabit Easy Smart Switch with 4-Port PoE 8 10/100/1000Mbps RJ45 ports With 4 PoE ports, data and power can be transferred on one single cable Provides network monitoring, traffic prioritization and VLAN features Simple network set-up on top of plug-and-play connectivity Web-based user interface and Easy Smart Configuration Utility simplify configuration
Unmanaged switches Cisco Business 110 offer high-speed of 10/100/1000 Mbps for small business networks. Simple operation and support for PoE for access points and IP telephony. Includes quality of service, loop detection, and more.
Managed POE switch with 24 gigabit ports + 2 SFP ports, designed for use in small and medium-sized networks. It is equipped with a variety of advanced features such as PoE support, advanced management options, network troubleshooting and diagnostic tools, and energy-saving technologies. The switch is particularly suitable for situations where IP installations are required for security camera purposes.
Managed switch with Gigabit Ethernet speed, 48 Giga ports, 4 10Giga SFP+ ports, console outputs, and remote management. The switch is suitable for large and complex networks, equipped with advanced authentication options and support for multicast communication, and provides a variety of management interfaces, including CLI and SSH.
Managed switch with Gigabit Ethernet speed, 24 Giga ports, 4 10Giga SFP ports, console ports, and remote management. The switch is suitable for large and complex networks, providing advanced security and support for multiple communication standards, and equipped with a variety of management interfaces, including CLI and SSH.
The DGS-1100 switch is a managed switch that provides 24 gigabit ports, including 2 SFP ports for uplink connections. The switch is suitable for use in small and medium-sized businesses, as well as advanced business systems, and offers support for various PoE (Power over Ethernet) standards, making it ideal for installations of IP security cameras and devices such as VoIP phones and access points.
GS1024 is an unmanaged switch that includes 24 ports with speeds of 10/100/1000 Mbps and an internal power supply. The switch is compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3ab standards, and it contains 24 ports that support Auto Negotiation and Auto MDI/MDIX capabilities, providing smart switch capabilities for device connectivity to the network. The switch is built with a Non-blocking switching architecture style, allowing for full-speed packet transmission in the network and packet filtering. The switch operates using the Store-and-Forward method and supports automatic learning and aging of MAC addresses with a capacity of 8K.